Used for cutting steel plates. When the required outlines are designed on PC, it can cut steel plates automatically.
Hobbing machine
Used for machining gears with max diameter 2000mm and modulus 20.
Boring machine
Used for machining of outer circle and inner circle of big round parts.
Boring machine
Used for machining of bearing bore. It can assure the vertical and horizontal finish accuracy for bore and vertical finish accuracy for section.
Boring machine
Used for machining of bearing bore. It can assure the vertical and horizontal finish accuracy for bore and vertical finish accuracy for section.
Longmen milling
Used for machining of surface of big parts.
Verticallathe
Used for machining of outer circle and inner circle of big round parts.
Test platform
For dynamic load testing, with 200T load.
For testing the working load of windlass and winch.
Test platform
For dynamic load testing, with 200T load.
For testing the working load of windlass and winch.
800T pull cylinder
For static load testing, with 400T pull and 800T push
Brake holding load of all windlass and winches to be tested by it. Also it can test the holding load of stoppers, chocks, roller fairleads and swivel fairleads.
Noteching machine
Noteching machine, make samples for impact testing machine.
Impact testing machine
Impact-testing-machine
Printer
Printer for tensile strength curve
Low temperature tank
Low temperature tank, min -60 degree, for testing mechanical property under low temperature.
Tensile strength curve
Tensile machine with 60T capacity for testing mechanical property